Project Relay 3

Using Two-button and Two Relay to Light bulb on/off

        In this project, we are using two-button which is the N.O button and N.C button to turn the light bulb which uses 220v on/off. The special thing about this project is that we could just push the N.O button once and the light will always be on no matter what we do even if we release our hand from the button. So when we press the N.C button (In my case we don't have the N.C button so we use jumper instead) the power will be cut off from the light so the bulb will turn off.

Project Relay 2

Using Micro-Controller to control Bulb through Relay

     This Project we are going to use Micro-Controller to turn on/off the bulb through Relay. Through Relay we use Micro Controller as a signal transmitter to give a signal to the relay to turn on and off relay through that we able to turn on and off the 220v bulb. In this project, Micro-Controller gives a signal to the Transistor (2n2222 or BC547) to turn on/off the relay. So the Schematic isn't so different from the last project that we do.

Project Relay 1

Using Relay to Control 220v Bulb that have Battery

     
      This project is using a relay to control a light bulb with 220v that is equipped with a Battery. We're using 220v to light the light bulb when we need to just like in the picture on the right. So we using switch to turn on and off so when we want to turn off the light. Instead of using it directly we use a relay as another switch to control the light.

My First Week of College in Faculty of Engineering

After entering University, I thought it was going to be very easy to get by. In fact it was only just the beginning. The first day of school was on November and after entering the i could see all these strange people sitting in different places and only mining there own business. Not long after the professor enter the class room, I felt so intimating and exciting. I don't know anything at all or anyone, But then i met my friend from high school he was also studying in TEED (Technology Electrics Engineering Department). The Professor asked us to introduce ourselves. That was our First day was like.